Roland Log Splitter S 4000D User Guide

Owner’s Manual  
Main Features  
The S-4000D is a splitter and power distributor for use with the RSS Digital Snake System. Using this device  
enables you to do the following:  
It permits you to split the master REAC device’s input audio to a split REAC device.  
It enables you to extend REAC cables in lengths of 100 meters.  
This unit supplies power to REAC devices compatible with REAC EMBEDDED POWER.  
This unit is equipped with 8 REAC ports that supply power to REAC devices compatible with REAC EMBEDDED  
POWER.  
REAC EMBEDDED POWER is a technology for using Cat5e cables to supply power as well as REAC audio signals.  
REAC devices compatible with REAC EMBEDDED POWER can accomplish REAC communication and power  
supply using just a connection via REAC cables, with no need to use an AC adaptor or AC power cord as the  
power source.  
with REAC EMBEDDED POWER. If the REAC device is found to be compatible with REAC EMBEDDED POWER,  
this unit automatically supplies power to it. Power is not supplied if the device is not compatible.  
Before using this unit, carefully read the sections entitled: “IMPORTANT SAFETY INSTRUCTIONS”  
(p. 2), “USING THE UNIT SAFELY” (p. 3–4), and “IMPORTANT NOTES” (p. 5). These sections provide  
important information concerning the proper operation of the unit. Additionally, in order to  
ensure that you have gained a good grasp of every feature provided by your new unit, the  
Owner’s manual should be read in its entirety. The manual should be saved and kept on hand as  
a convenient reference.  
Copyright © 2009 ROLAND CORPORATION  
All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION.  
 
 
USING THE UNIT SAFELY  
The  
symbol alerts the user to important instructions or  
Used for instructions intended to alert the  
user to the risk of death or severe injury  
should the unit be used improperly.  
warnings.The specific meaning of the symbol is  
determined by the design contained within the triangle. In  
the case of the symbol at left, it is used for general  
cautions, warnings, or alerts to danger.  
Used for instructions intended to alert the  
user to the risk of injury or material  
damage should the unit be used  
improperly.  
The  
symbol alerts the user to items that must never be  
carried out (are forbidden). The specific thing that must  
not be done is indicated by the design contained within  
the circle. In the case of the symbol at left, it means that  
the unit must never be disassembled.  
* Material damage refers to damage or  
other adverse effects caused with  
respect to the home and all its  
furnishings, as well to domestic animals  
or pets.  
The symbol alerts the user to things that must be  
carried out. The specific thing that must be done is  
indicated by the design contained within the circle. In the  
case of the symbol at left, it means that the power-cord  
plug must be unplugged from the outlet.  
001-50  
008d  
Connect mains plug of this model to a mains socket  
Connect only specified devices (S-4000, S-1608, M-48,  
and other such REAC products) to REAC ports 3  
through 10 (REAC EMBEDDED POWER).  
outlet with a protective earthing connection.  
.................................................................................................................................  
.................................................................................................................................  
002a  
008e  
Do not open or perform any internal modifications on  
Use only the attached power-supply cord. Also, the  
the unit.  
supplied power cord must not be used with any other  
device.  
.................................................................................................................................  
003  
.................................................................................................................................  
Do not attempt to repair the unit, or replace parts  
009  
within it (except when this manual provides specific  
instructions directing you to do so). Refer all servicing  
to your retailer, the nearest Roland Service Center, or  
an authorized Roland distributor, as listed on the  
“Information” page.  
Do not excessively twist or bend the power cord, nor  
place heavy objects on it. Doing so can damage the  
cord, producing severed elements and short circuits.  
Damaged cords are fire and shock hazards!  
.................................................................................................................................  
011  
.................................................................................................................................  
Do not allow any objects (e.g., flammable material,  
004  
Never install the unit in any of the following locations.  
coins, pins); or liquids of any kind (water, soft drinks,  
etc.) to penetrate the unit.  
Subject to temperature extremes (e.g., direct  
sunlight in an enclosed vehicle, near a heating  
duct, on top of heat-generating equipment); or are  
.................................................................................................................................  
Damp (e.g., baths, washrooms, on wet floors); or  
are  
012a  
Immediately turn the power off, remove the power  
cord from the outlet, and request servicing by your  
retailer, the nearest Roland Service Center, or an  
authorized Roland distributor, as listed on the  
“Information” page when:  
Exposed to steam or smoke; or are  
Subject to salt exposure; or are  
Humid; or are  
The power-supply cord or the plug has been  
Exposed to rain; or are  
damaged; or  
Dusty or sandy; or are  
If smoke or unusual odor occurs  
Subject to high levels of vibration and shakiness.  
Objects have fallen into, or liquid has been spilled  
onto the unit; or  
.................................................................................................................................  
007  
Make sure you always have the unit placed so it is  
The unit has been exposed to rain (or otherwise  
has become wet); or  
level and sure to remain stable. Never place it on  
stands that could wobble, or on inclined surfaces.  
The unit does not appear to operate normally or  
exhibits a marked change in performance.  
.................................................................................................................................  
.................................................................................................................................  
008a  
The unit should be connected to a power supply only  
of the type described in the operating instructions, or  
as marked on the rear side of unit.  
.................................................................................................................................  
3
 
   
USING THE UNIT SAFELY  
013  
When using this device in an environment where  
children are present, an adult should provide  
101a The unit should be located so that its location or  
position does not interfere with its proper ventilation.  
supervision until the child is capable of following all  
the rules essential for the safe operation of the unit.  
.................................................................................................................................  
.................................................................................................................................  
102b  
Always grasp only the plug on the power-supply cord  
014  
when plugging into, or unplugging from, an outlet or  
this unit.  
Protect the unit from strong impact.  
(Do not drop it!)  
.................................................................................................................................  
103a  
.................................................................................................................................  
At regular intervals, you should unplug the power  
015  
Do not force the unit’s power-supply cord to share an  
plug and clean it by using a dry cloth to wipe all dust  
and other accumulations away from its prongs. Also,  
disconnect the power plug from the power outlet  
whenever the unit is to remain unused for an  
extended period of time. Any accumulation of dust  
between the power plug and the power outlet can  
result in poor insulation and lead to fire.  
outlet with an unreasonable number of other devices.  
Be especially careful when using extension cords—the  
total power used by all devices you have connected to  
the extension cord’s outlet must never exceed the  
power rating (watts/amperes) for the extension cord.  
Excessive loads can cause the insulation on the cord  
to heat up and eventually melt through.  
.................................................................................................................................  
104  
.................................................................................................................................  
Try to prevent cords and cables from becoming  
016  
Before using the unit in a foreign country, consult  
entangled. Also, all cords and cables should be placed  
so they are out of the reach of children.  
.................................................................................................................................  
with your retailer, the nearest Roland Service Center,  
or an authorized Roland distributor, as listed on the  
“Information” page.  
106  
Never climb on top of, nor place heavy objects on the  
.................................................................................................................................  
unit.  
026  
Do not put anything that contains water (e.g., flower  
.................................................................................................................................  
vases) on this unit. Also, avoid the use of insecticides,  
perfumes, alcohol, nail polish, spray cans, etc., near  
the unit. Swiftly wipe away any liquid that spills on the  
unit using a dry, soft cloth.  
107b Never handle the power cord or its plugs with wet  
hands when plugging into, or unplugging from, an  
outlet or this unit.  
.................................................................................................................................  
.................................................................................................................................  
108a  
Before moving the unit, disconnect the power plug  
from the outlet, and pull out all cords from external  
devices.  
.................................................................................................................................  
109a  
Before cleaning the unit, turn off the power and  
unplug the power cord from the outlet.  
.................................................................................................................................  
110a  
Whenever you suspect the possibility of lightning in  
your area, pull the plug on the power cord out of the  
outlet.  
.................................................................................................................................  
118c  
Keep the grounding terminal screw you may remove,  
and the included REAC connector covers and rubber  
feet in a safe place out of children’s reach, so there is  
no chance of them being swallowed accidentally.  
.................................................................................................................................  
4
 
 
IMPORTANT NOTES  
Power Supply  
Maintenance  
401a  
301  
Do not connect this unit to the same electrical outlet that is  
being used by an electrical appliance that is controlled by an  
inverter (such as a refrigerator, washing machine, microwave  
oven, or air conditioner), or that contains a motor. Depending  
on the way in which the electrical appliance is used, power  
supply noise may cause this unit to malfunction or may  
produce audible noise. If it is not practical to use a separate  
electrical outlet, connect a power supply noise filter between  
For everyday cleaning wipe the unit with a soft, dry cloth or  
one that has been slightly dampened with water. To remove  
stubborn dirt, use a cloth with a mild, non-abrasive detergent.  
Afterwards, be sure to wipe the unit thoroughly with a soft,  
dry cloth.  
402  
Never use benzine, thinners, alcohol or solvents of any kind, to  
avoid the possibility of discoloration and/or deformation.  
this unit and the electrical outlet.  
307  
Before connecting this unit to other devices, turn off the  
Additional Precautions  
power to all units. This will help prevent malfunctions and/or  
553  
damage to speakers or other devices.  
Use a reasonable amount of care when using the unit’s switch  
308  
Although the LEDs are switched off when the POWER switch is  
and when using its jacks and ports. Rough handling can lead  
switched off, this does not mean that the unit has been  
completely disconnected from the source of power. If you  
need to turn off the power completely, first turn off the  
POWER switch, then unplug the power cord from the power  
outlet. For this reason, the outlet into which you choose to  
connect the power cord’s plug should be one that is within  
easy reach and readily accessible.  
to malfunctions.  
556  
When connecting / disconnecting all cables, grasp the  
connector itself—never pull on the cable. This way you will  
avoid causing shorts, or damage to the cable’s internal  
elements.  
557  
A small amount of heat will radiate from the unit during  
normal operation.  
559a  
When you need to transport the unit, package it in the box  
(including padding) that it came in, if possible. Otherwise, you  
will need to use equivalent packaging materials.  
Placement  
352a  
This device may interfere with radio and television reception.  
Do not use this device in the vicinity of such receivers.  
352b  
Noise may be produced if wireless communications devices,  
such as cell phones, are operated in the vicinity of this unit.  
Such noise could occur when receiving or initiating a call, or  
while conversing. Should you experience such problems, you  
should relocate such wireless devices so they are at a greater  
distance from this unit, or switch them off.  
354a  
Do not expose the unit to direct sunlight, place it near devices  
that radiate heat, leave it inside an enclosed vehicle, or  
otherwise subject it to temperature extremes. Excessive heat  
can deform or discolor the unit.  
355b  
When moved from one location to another where the temper-  
ature and/or humidity is very different, water droplets  
(condensation) may form inside the unit. Damage or  
malfunction may result if you attempt to use the unit in this  
condition. Therefore, before using the unit, you must allow it  
to stand for several hours, until the condensation has  
completely evaporated.  
360  
Depending on the material and temperature of the surface on  
which you place the unit, its rubber feet may discolor or mar  
the surface.  
You can place a piece of felt or cloth under the rubber feet to  
prevent this from happening. If you do so, please make sure  
that the unit will not slip or move accidentally.  
*
Neutrik and EtherCon are registered trademarks of Neutrik, Inc.  
5
 
     
USING THE UNIT SAFELY ................................................................................3  
Front Panel................................................................................................................................................................................... 7  
Rear Panel..................................................................................................................................................................................... 8  
Connecting the Power Cord.................................................................................................................................................. 9  
Attaching the Power Cord Clamp........................................................................................................................................ 9  
Turning the Power On and Off.............................................................................................................................................. 9  
Turning the Power On................................................................................................................................................ 9  
Turning the Power Off................................................................................................................................................ 9  
Important Notes When Installing ......................................................................................................................................10  
Cooling-fan Intake Port and Ventilation Port ..................................................................................................10  
Concerning REAC Cables and Their Handling...............................................................................................................12  
System Connection Example ...................................................................... 13  
Connecting the S-4000D to a V-Mixing System ...........................................................................................................13  
Connecting the S-4000D to an Analog Mixer System................................................................................................14  
Main Specifications ..................................................................................... 15  
Information .................................................................................................. 15  
6
 
Panel Descriptions  
Front Panel  
REAC Ports 1–10  
Never connect any equipment  
other than REAC devices to  
REAC ports 3 through 10.  
You can connect the master REAC device to the desired REAC port and split its output to  
other REAC ports.  
REAC ports 1 and 2 do not  
support REAC EMBEDDED  
POWER.  
REAC ports 3 to 10 are compatible with REAC EMBEDDED POWER, and can supply power  
to devices compatible with REAC EMBEDDED POWER.  
When a REAC device is connected, the system automatically detects whether the device is  
compatible with REAC EMBEDDED POWER and supplies power if compatible.  
Connect devices compatible  
with REAC EMBEDDED POWER  
to REAC ports 3 through 10.  
Power is not supplied if the device is not compatible with REAC EMBEDDED POWER.  
POWER/LINK/ACT Indicators  
These indicate the status of the ports. The indicators function as follows.  
Indicator  
Status  
Red  
(POWER)  
Green  
(LINK)  
Yellow  
(ACT)  
With nothing connected  
Off  
Lit  
Off  
Off  
When supplying power to a REAC EMBEDDED POWER device  
When enabled for transmission  
Lit  
Lit  
Lit  
When communicating with another REAC device  
Flashing  
POWER Indicator  
Powering up the unit makes the POWER indicator light up.  
[POWER] Switch  
This switches the power on and off.  
7
 
   
Panel Descriptions  
Rear Panel  
Grounding Terminal  
If necessary, use this terminal to connect the S-4000D chassis to an external grounding  
source.  
*
Never attempt to use the following sources for an external ground connection:  
Water pipes (may result in shock or electrocution)  
Gas pipes (may result in fire or explosion)  
Telephone-line ground or lightning rod (may be dangerous in the event of lightning)  
AC INPUT  
Connect the supplied power cord here.  
Secure the power cord with the cord clamps (p. 9) to prevent accidental disconnection of  
the cords.  
Air Intake Vents  
Cooling Fan Exhaust Vents  
The S-4000D contains cooling fans that prevent the unit from overheating. The air intake  
vents provide fresh air for the cooling fans and the fans expel hot air through these vents.  
Be sure never to block the  
cooling fan exhaust vents and air  
intake vents. Doing so may cause  
the S-4000D to overheat and be  
damaged.  
*
Clean away any buildup of dust in the intake port or ventilation port using a vacuum cleaner or the  
like.  
8
 
 
Turning the Power On and Off  
Connecting the Power Cord  
Connect one end of the supplied AC power cord to a grounded AC outlet, and the other  
end to the AC INPUT connector to provide power for the S-4000D’s internal power supply.  
Use only the supplied power cord  
to prevent damage to the units.  
Attaching the Power Cord Clamp  
To prevent the power cord from being unplugged inadvertently, you should secure the  
power cord in place using the power cord clamp.  
1
Lift up the power cord clamp, then insert  
the power cord into AC INPUT on the rear  
panel.  
2
Lower the power cord clamp to secure the  
power cord plug.  
Turning the Power On and Off  
Turning the Power On  
Once the connections have been completed, turn on power to your various devices in the  
order specified. By turning on devices in the wrong order, you risk causing malfunction  
and/or damage to speakers and other devices.  
To prevent malfunction and/or  
damage to speakers or other  
devices, always turn down the  
volume, and turn off the power  
on all devices before making any  
connections  
1
2
3
Connect the peripheral devices.  
Set the [POWER] switch on the unit’s front panel to ON to switch on the power.  
Turn on the power to the peripheral devices.  
*
REAC devices compatible with REAC EMBEDDED POWER may have no power switch. In such cases,  
the power is switched on automatically when the device is connected to the unit.  
Turning the Power Off  
1
2
Turn off the power to the peripheral devices.  
Switching off the power to the  
unit also stops the supply of  
power to any REAC devices  
compatible with REAC  
Set the [POWER] switch on the unit’s front panel to OFF to switch off the  
power  
*
If you need to turn off the power completely, first turn off the POWER switch, then unplug the  
power cord from the power outlet. Refer to “Power Supply” (p. 5)  
EMBEDDED POWER that are  
connected to the unit.  
9
 
             
About Placement  
Important Notes When Installing  
Cooling-fan Intake Port and Ventilation Port  
This unit performs forced cooling by means of a cooling fan. Give attention to the  
following points.  
Never block the cooling-fan intake port or ventilation port in the rear panel. Doing so  
may cause the temperature of the unit’s interior to rise, resulting in malfunction caused  
by heat.  
Clean away any buildup of dust in the intake port or ventilation port using a vacuum  
cleaner or the like.  
When Installing in a Rack  
This unit can be installed in a rack. When installing the unit in a rack, to ensure efficient  
cooling, give attention to the following points.  
Ensure that the location provides good air flow and ventilation.  
Never block the cooling-fan intake port or ventilation port in the rear panel.  
Avoid using the S-4000D in sealed-type rack mounts. As this type of rack does not  
permit heated air within the rack to be expelled, the heated air is drawn into the  
S-4000D as a result, thus preventing adequately efficient cooling.  
If the rack’s rear panel is not removable, ensure that a ventilation port or exhaust fan is  
provided at the top of the rack’s rear panel to expel any accumulated heat.  
If the S-4000D is mounted in a portable rack, remove both the front and rear rack covers  
before use to ensure that the S-4000D’s front and rear panels remain unobstructed.  
When installing the unit on a rack, detach the rubber feet from the bottom of the unit.  
Use due caution when mounting the S-4000D in a rack or other enclosure so you don’t  
get your fingers wedged or pinched.  
10  
 
       
About Placement  
Using the REAC Connector Covers  
If using commercially available Cat5e Ethernet cables, attach the supplied REAC connector  
covers to the connectors.  
Remove the REAC connector  
covers if you are using REAC  
cables with EtherCon type  
connectors.  
*
Attaching the REAC connector covers is a necessary measure to counter electromagnetic noise.  
Take care not to lose the REAC  
connector covers removed at  
this time.  
Attaching the Rubber Feet  
Attach the rubber feet when not rack mounting the unit.  
Peel off the backing from the double-sided adhesive tape on the rubber feet and attach  
the feet at the points indicated in the figure below.  
11  
 
   
Notes to Observe in Using the REAC System  
Concerning REAC Cables and Their Handling  
The REAC cables used in digital snake systems employ computer network technology to  
enable transmission of multichannel audio signals.  
In very rare cases, however, noise may be generated when these systems are used in  
certain environments. If noise is present, check the following points.  
Ensure that cables used for REAC connections conform to the Cat5e (Ethernet Category 5)  
standard.  
To maintain the transmission  
quality of REAC digital  
No single cable should be longer than 100 meters.  
Do not use cables with cut or torn coverings.  
Do not subject cables to undue stress.  
communication, use the  
following optional items as 100-  
meter and 20-meter REAC cables.  
100-meter REAC cables  
SC-W100S  
Do not wind or bend cables such that the radius of the turn is 25 mm or less, and do not double  
cables over.  
W100S-R  
Do not bind cables tightly into bundles.  
20-meter REAC cables  
SC-W20F  
12  
 
   
System Connection Example  
Connecting the S-4000D to a V-Mixing System  
Lead Vocal  
Vocal 1  
Vocal 2  
Vocal 3  
Keyboard  
Guitar  
Bass  
Drum  
M-48 x 8  
REAC cable or Cat5e Ethernet cable  
REAC port 3  
7
8
9
10  
4
5
6
16 channels of audio input  
REAC port 1  
2
S-4000D  
16 channels of audio input  
S-1608 (Slave REAC device)  
S-1608 (Slave REAC device)  
REAC port  
REAC port  
8 channels of  
audio output  
REAC cable or  
Cat5e Ethernet cable  
Front speakers  
8 channels of audio output  
REAC A port  
REAC B port  
M-400 (FOH)  
*
*
*
The M-400 must be running system software version 2.0 or later.  
The M-48 can be set and managed from the M-400 only if the M-48 is connected to the M-400’s REAC B port via the S-4000D.  
In order to maintain the transmission quality of the digital REAC signal, use fully approved Cat5e Ethernet cable such as the 20 meter or 100 meter  
REAC cables (SC-W20F/SC-W100S/W100S-R; sold separately).  
13  
 
   
System Connection Example  
Connecting the S-4000D to an Analog Mixer System  
Lead Vocal  
Vocal 1  
Vocal 2  
Vocal 3  
Keyboard  
Guitar  
Bass  
Drum  
M-48 x 8  
REAC cable or Cat5e Ethernet cable  
REAC port 3  
7
8
9
10  
4
5
6
REAC port 1 or 2  
S-4000D  
REAC cable or Cat5e Ethernet cable  
S-1608 (Master REAC device)  
REAC port  
Computer  
INPUT connector 1–16  
RS-232C cable  
Serial port  
*
You can connect up to 16 bus out or channel  
direct out signals.  
REMOTE  
connector  
*
You’ll need to install the S-4000 RCS  
version 2.0 (or later) S-4000 remote  
control software.  
If the S-1608 is replaced by the S-4000S, a  
total of 40 signals can be connected.  
Analog/Digital Mixer  
*
*
The S-1608 system must be running system software version 2.0 or later.  
If you’re using the S-4000 system, the S-4000 system must be running system software 2.1 or later.  
In order to maintain the transmission quality of the digital REAC signal, use fully approved Cat5e Ethernet cable such as the 20 meter or 100 meter  
REAC cables (SC-W20F/SC-W100S/W100S-R; sold separately).  
14  
 
 
Main Specifications  
Connectors  
Indicators  
REAC port: (RJ-45 EtherCon type) x 2  
REAC EMBEDDED POWER port: (RJ-45 EtherCon type) x 8  
REAC EMBEDDED POWER: Red x 8  
LINK:  
ACT:  
Green x 10  
Yellow x 10  
POWER: Blue x 1  
Power Supply  
AC 115 V, AC 117 V, AC 220 V, AC 230 V, AC 240 V (50/60 Hz)  
Power Consumption  
2.2A / AC 115 V / AC 117V  
1.2A / AC 220 V / AC 230 V / 240 V  
*
At Maximum REAC EMBEDDED POWER  
Dimensions  
482.0 (W) x 285.0 (D) x 87.8 (H) mm  
19 (W) x 11-1/4 (D) x 3-1/2 (H) inches  
Weight  
4.2 kg  
9 lbs 5 oz  
Operation Temperature  
Accessories  
0 to +40 degrees centigrade  
+32 to +104 degrees Fahrenheit  
Power Cord x 1, REAC Connector Cover x 10, Rubber Foot x 4, Owner’s Manual x 1  
*
In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.  
430  
84  
482  
15  
 
 
For EU Countries  
For the USA  
This product complies with the requirements of EMCD 2004/108/EC and LVD 2006/95/EC.  
FEDERAL COMMUNICATIONS COMMISSION  
RADIO FREQUENCY INTERFERENCE STATEMENT  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the  
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential  
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee  
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  
(1) this device may not cause harmful interference, and  
(2) this device must accept any interference received, including interference that may cause undesired operation.  
Unauthorized changes or modification to this system can void the users authority to operate this equipment.  
This equipment requires shielded interface cables in order to meet FCC class B Limit.  
For Canada  
NOTICE  
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.  
AVIS  
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.  
(
)
For C.A. US Proposition 65  
WARNING  
This product contains chemicals known to cause cancer, birth defects and other reproductive harm, including lead.  
For China  
16  
 
For EU Countries  
17  
 

Quadra Fire Stove 31M ACC GT User Guide
RCA CRT Television 24V511T User Guide
Rival Frozen Dessert Maker IC500 User Guide
Roadmaster Speaker VRA10PSW User Guide
Royal Appliance Vacuum Cleaner M5036_5037 User Guide
Rubbermaid Outdoor Storage 5L20 User Guide
Ryobi Drill HP1442M User Guide
Samsung Fax Machine FX100 User Guide
Sanyo CRT Television AVM 32F4, AVM32F9 User Guide
Schumacher Battery Charger CR 100A User Guide